2016 NECA 1/4 SCALE DONATELLO from the 1990 JIM HENSON Movie

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

I purchased 2 only because one source was taking over 2 months on pre-order when I bought another one directly from NECA’s ebay store. This one was opened to enjoy its immaculate detail and photorealistic likeness of the movies. NECA manufactured these quarter scale replicas to every single detail from the motion pictures. I am truly amazed at the quality and scale of effort put forth into making these toys for mass production. This is hands down the most detailed and high quality action figure I’ve ever seen in my entire life. Buy one if you ever have the chance!

Authentic 100% NECA North American Release, not an unlicensed imitation bootleg.

Very hard to obtain and purchase only when NECA does limited releases on their ebay store page. You can pre-order these figures from various online retail outlets but there is no guarantee you will get one in a timely manner.

 

2016 NECA 1/4 Scale Donatello - Full body shot posing with bo staff.

2016 NECA 1/4 Scale Donatello – Full body shot posing with bo staff.

2016-2017 NECA Teenage Mutant Ninja Turtles 1/4 SCALE REPLICA from the 1990 JIM HENSON FILMS
DONATELLO

Comes with:
-extra pairs of hands, open, clutched, and thumbs up
-a slice of pizza
-a cannister of TGRI ooze
-bo staff
-cloth bandanna
-cloth ribbon ties for bo staff on shell
-removable wrist straps for changing hands
-inflated ego

2016 NECA 1/4 Scale Donatello - Action pose with bo staff over his shoulders

2016 NECA 1/4 Scale Donatello – Action pose with bo staff over his shoulders

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a slice of his favorite pizza and giving a thumbs up to the camera!

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding a cannister of ooze from TCRI labs.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie holding his bo staff. Notice the veins in his hands and arms. Such detail and quality!

2016 NECA 1/4 Scale Donatello – Closeup of Donnie holding his bo staff. Notice the veins in his hands and arms. Such detail and quality!

2016 NECA 1/4 Scale Donatello - Closeup of Donnie's face.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie’s face.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie's face.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie’s face.

2016 NECA 1/4 Scale Donatello - Closeup of Donnie's face.

2016 NECA 1/4 Scale Donatello – Closeup of Donnie’s face.

KaptainMyke’s “KRANG’S GROSS DIMENSION X BODY” [PROGRESS] UPDATE

Check out KaptainMyke’s latest project – it’s  a big one!  It’s my very first custom action figure I’ve ever attempted to build.  I took a little bit of what I researched online and a little bit of what seems to make sense to me and cobbled together this insane idea in my head. For the sake of being the first in the world to attempt to build such an interesting figure, I will be unveiling progression photos and production notes.   I would like to simply call this figure “2017 Krang’s Original Alien Body”.

Let’s start with some background information, shall we?

1990 Krang's Gross Dimension X Body Concept Sketch by Dan Berger and Stephen Murphy of Mirage Studios.

1990 Krang’s Gross Dimension X Body Concept Sketch by Dan Berger and Stephen Murphy of Mirage Studios.

First of all, Krang’s Gross Dimension X Body is a failed concept drawing sketch from 1990 (by Dan Berger and Steven Murphy from Mirage Studios) of a toy presented to Playmates Toys for consideration of a new action figure.  The design and idea was scrapped and never to be seen or heard from again.  I am here presently trying to change that, in 2017.  I will be attempting to build the first prototype test shot real life example of this figure drawing.  It will not be easy, and will require countless hours of patience, time, and thoughtful engineering.

So let’s start with some drawings and show you where my Krang heads are gonna be screwed onto.  My initial idea in my head is to feature 3 removable heads:  A hand sculpted “Gross Head”, a “Broken Space Helmet Head”, and a glowing radioactive version of the standard classic pink “Krang Brain Head”.  See concept drawings:

Figure 1. The Gross Head 2017 Copyright KaptainMyke Figures Krang's Gross Dimension X Concept Drawing of "Gross Head" by Michael Frederik Sorensen (KaptainMyke). 1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

Figure 1.
The Gross Head
2017 Copyright KaptainMyke Figures
Krang’s Gross Dimension X Concept Drawing of “Gross Head” by Michael Frederik Sorensen (KaptainMyke).
1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

Figure 3. Original concept of box packaging art and layouts scribbled on the back of a sheet of scrap paper by me. 2017 Copyright KaptainMyke Figures Krang's Gross Dimension X Concept Drawing of "Gross Head" by Michael Frederik Sorensen (KaptainMyke). 1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

Figure 3.
Original concept of box packaging art and layouts scribbled on the back of a sheet of scrap paper by me.
2017 Copyright KaptainMyke Figures
Krang’s Gross Dimension X Concept Drawing of “Gross Head” by Michael Frederik Sorensen (KaptainMyke).
1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

Figure 2. Original concept production notes scribbled on the back of an ebay invoice by me 2017 Copyright KaptainMyke Figures Krang's Gross Dimension X Concept Drawing of "Gross Head" by Michael Frederik Sorensen (KaptainMyke). 1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

Figure 2.
Original concept production notes scribbled on the back of an ebay invoice by me
2017 Copyright KaptainMyke Figures
Krang’s Gross Dimension X Concept Drawing of “Gross Head” by Michael Frederik Sorensen (KaptainMyke).
1990 Copyright Teenage Mutant Ninja Turtles and Mirage Studios are trademarks to their respective owners.

So I figured, “What’s the best way to start?” I need a KRANG! Here we go:

I purchased a 1991 loose Krang's Giant 11" Android Body with Krang Brain and Bubble Walker.

I purchased a 1991 loose Krang’s Giant 11″ Android Body with Krang Brain and Bubble Walker.

Hmmm. “That’s not right. He looks fat!” I can fix this!

Original 1991 Krang's Giant Android Body I have started hash marks with sharpie on what I need to grind off with a dremel tool.

Original 1991 Krang’s Giant Android Body
I have started hash marks with sharpie on what I need to grind off with a dremel tool.

Original 1991 Krang's Giant Android Body I have started hash marks with sharpie on what I need to grind off with a dremel tool.

Original 1991 Krang’s Giant Android Body
I have started hash marks with sharpie on what I need to grind off with a dremel tool.

Original 1991 Krang's Giant Android Body I have started hash marks with sharpie on what I need to grind off with a dremel tool.

Original 1991 Krang’s Giant Android Body
I have started hash marks with sharpie on what I need to grind off with a dremel tool.

The next process is simple. I figured I needed a foundation or base for a core 4″ screw and bolt setup as a spine and plug for the removable heads. I also begin adding armature wire for sculpting the arms and hands by hand with clay. Very tedious process, but simple enough. I used Krazy Glue to glue the armature wire and drilled contact points for the wire. This will hopefully prevent cracking and make the arms resilient to twisting and turning at the shoulders.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

After getting the arms and overall pose where I wanted it, I still considered the figure to be too bulky for all that clay I’m going to add on top of him – so off to the dremel tool we go!

Original 1991 Krang's Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang’s Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang's Giant Android Body (with armature wire) shaved off most of the extra bulk and body ciruitry that was there before...

Original 1991 Krang’s Giant Android Body (with armature wire) shaved off most of the extra bulk and body ciruitry that was there before…

 Original 1991 Krang's Giant Android Body (with armature wire) The read will feature a broken off reptillian tail and scales traveling down the spine and legs.

Original 1991 Krang’s Giant Android Body (with armature wire) The read will feature a broken off reptillian tail and scales traveling down the spine and legs.

Original 1991 Krang's Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang’s Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang's Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang’s Giant Android Body (with armature wire) Starting to build the inner mass of the arms connecting to the 4 fingered hands.

Original 1991 Krang's Giant Android Body (with armature wire) shaved off most of the extra bulk and body ciruitry that was there before...

Original 1991 Krang’s Giant Android Body (with armature wire) shaved off most of the extra bulk and body ciruitry that was there before…

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the spinal core.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the spinal core.

I began added a very thin layer of clay in order to get a base for the bulk and mass that will become his arms and legs.  As you can see in the concept sketch, there is a lot of veins and bones from within a lot of muscle tissue mass.  So I figured, “I should start thin so I have plenty of surface area to work with later”

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the 3 toe feet with oversized heal and bone structure.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the 3 toe feet with oversized heal and bone structure.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the 4 inch bolt and screw washer spinal core inside the torso. I haven't decided what I will use as mass for the stomach region yet. I tried styrofoam at first but it expands and the clay shrinks when dried so there was definite cracking. I decided to scrap that idea.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the 4 inch bolt and screw washer spinal core inside the torso. I haven’t decided what I will use as mass for the stomach region yet. I tried styrofoam at first but it expands and the clay shrinks when dried so there was definite cracking. I decided to scrap that idea.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the 3 toe feet with oversized heal and bone structure.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the 3 toe feet with oversized heel and bone structure.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the broken off tailbone and reptilian lizard tail.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the broken off tailbone and reptilian lizard tail.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the broken off tailbone and reptilian lizard tail.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the broken off tailbone and reptilian lizard tail.

Original 1991 Krang's Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Original 1991 Krang’s Giant Android Body with armature wire and beginning stages of building the arms with a thin layer of terra cotta air dry clay.

Eventually, the 14″ tall figure will be greenish with brown and grey overtones. He’s a lizard reptilian alien race. Only the brain is pink and squishy. I’m going completely by references of Krang creator David Wise who has stated via interviews, podcasts, blog posts, and forum posts consistently that Krang is not an Utrom and was once a reptilian who was stripped of his body on Dimension X.

This goes deep into the rabbit hole of things that never was but should have been. There are hints via various cartoon iterations that Krang is not what we all think he is or comes from where most think he came from. That’s another thing I love about the genius of this design and version of Krang. Conversely, the KRAANG we all know currently in the comics and cartoon is of an entire alien race from Dimension X. The older cartoons (2003) have shown in the past, Krang had cloned out into several bodies they are started walking upright and had tails like lizards. They looked like lizard people!

To be continued…

Well, that was the first 2 weeks. I’ll post more regarding sculpting of the heads and more!

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project “WORKS” Edition

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project "WORKS" Edition

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project “WORKS” Edition

2016 TMNT SHADOWS OF THE PAST BOARDGAME Kickstarter “WORKS” Ed.

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project “WORKS” Edition Sealed, Never Opened

A miniatures-based, sewer-crawling adventure featuring the Teenage Mutant Ninja Turtles!
Created by IDW Games

6,033 backers pledged $862,211 to help bring this project to life.

The Works Edition is a very special presentation of Teenage Mutant Ninja Turtles: Shadows of the Past. This exclusive box comes with the standard miniatures as well as a variant set of Teenage Mutant Ninja Turtles game pieces based off the art of Kevin Eastman, and Bebop & Rocksteady!

Exclusive pizza box
Kevin Eastman Variant Turtle miniatures
Kevin Eastman signed Lithograph
April O’Neil Hero Pack

The included photos with black backgrounds were obtained directly from the kickstarter fund raising project page and blog updates from Kevin Wilson’s site. This is to display to you, what is included inside this 7 lb sealed box of amazing Ninja Turtle awesomeness.

This was an amazing and ambitious project that was a wild success. Cowabunga Kevin, and Kevin!

2016tmntkickstarterworksedition_001

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project "WORKS" Edition

2016 Teenage Mutant Ninja Turtles: Shadows of the Past Board Game Kickstarter Project “WORKS” Edition

2016tmntkickstarterworksedition_013 2016tmntkickstarterworksedition_011 2016tmntkickstarterworksedition_008 2016tmntkickstarterworksedition_016

2016 TMNT Universe #1 Eastman inspired B&W sharpie fan art sketch by KaptainMyke.

2016 TMNT Universe #1 Eastman inspired B&W sharpie fan art sketch by KaptainMyke. I thought it'd make a great cover art piece.

2016 TMNT Universe #1 Eastman inspired B&W sharpie fan art sketch by KaptainMyke.

Commissioned Kevin Eastman Full Color KRANG Sketch Cover

I commissioned a very rare and very very hard to obtain KRANG SKETCH BY KEVIN EASTMAN from Trinity Comics. I was skeptical as he never cares to draw a krang sketch. HE ACTUALLY DREW THIS FOR ME! Many ask, many are turned down. I’ve only seen 2. Ever. Sent off immediately to CBCS for a YELLOW LABEL Grade from Trinity Comics and Eastman himself. He started on it in Baltimore, and took it with him to HOUSTON con and finished it in his offices according to Trinity Comics

I am very very thankful and very grateful for the opporotunity Trinity Comics gave to the board members at CBCS. I had to jump on this one, especially with the timing being right after I bought a ton of stuff from him and his website, and his new Three Zero Action Figures coming soon…so I figured maybe he’d throw me a bone and actually do the sketch. Which he did!  Thank you Kevin Eastman, and Trinity Comics!

2016 IDW TMNT #61 Artists Edition Sketch Cover, KRANG sketched in full color by Kevin Eastman on 9/10/2016

2016 IDW TMNT #61 Artists Edition Sketch Cover, KRANG sketched in full color by Kevin Eastman on 9/10/2016

This is NOT FOR SALE.

Probably ever.

Thank you