Pressing Comic Books with Digital Codes or Inserts

All modern age Marvel Comics comic books will feature a digital code sticker for reading your comic book online.

All modern age Marvel Comics comic books will feature a digital code sticker for reading your comic book online.

If you have been studying my guide on “How to Press Comic Books with a T-Shirt Heat Press“, I have mentioned there are some advanced aspects to pressing comic books on your own.  One advanced technique I would like to talk about today is the modern age books from Marvel Comics.  These comic books all have a Marvel Digital Code stamp insert.  You peel the sticker off and unlock the digital code online for your reading enjoyment and for any additional extra content the issue might offer to its reader.  Of course, if the sticker is peeled off one of these comic books you can immediately knock a grade or two off the overall condition with a dreaded “INCOMPLETE” on the label.  Obviously, most collectors (and you included reading this guide) leave the sticker intact and proceed to press the book and have it graded.

You might ask: “But why would I press a brand new book?”.  Brand new comics (variants, store exclusives, limited print runs, virgin covers, etc) worth over $100 should definitely be pressed to smooth out the production and printer bumps/waves. That can make all the difference in the world from a 9.6 to a 9.8 with no spine ticks or splits.

Never giving any thought, if you try to press one of these books, you are in for quite a surprise:  an ugly square shaped imprint glaring at you right in the face on the back cover and the last 4-5 pages as well.  Click to zoom any image in this article for a closer look. 

Look at the back cover of this pressed 2018 Marvel Comics AMAZING SPIDER-MAN #797 Young Guns Variant by Aaron Kuder. Oops! See the square imprint to the left of the "G" on the Young Guns logo? Look closely at the square white bump. (Click to zoom in for a closer look)

Look at the back cover of this pressed 2018 Marvel Comics AMAZING SPIDER-MAN #797 Young Guns Variant by Aaron Kuder. Oops! See the square imprint to the left of the “G” on the Young Guns logo? Look closely at the square white bump. (Click to zoom in for a closer look)

Look at the back cover of this pressed 2018 Marvel Comics AMAZING SPIDER-MAN #797 Young Guns Variant by Aaron Kuder. Oops! See the square imprint to the right of the Young Guns logo? Look closely at the square white bump.

Look at the back cover of this pressed 2018 Marvel Comics AMAZING SPIDER-MAN #797 Young Guns Variant by Aaron Kuder. Oops! See the square imprint to the left of the “G” on the Young Guns logo? Look closely at the square white bump. (Click to zoom in for a closer look)

As an amateur presser, you must take extra steps to prevent this from happening.  I will write a future article on “How to fix Marvel Digital Code Imprints on Back Covers”.

 

These steps will ensure you don’t cause damage to the back cover, or subsequent pages either.  This technique should also be applied with care when considering any comic book that features a Tattooz insert (such as Amazing Spider-man #238), Image #0 Coupons, etc) or poster pullouts.  There are also comics that feature Mark Jeweler’s Inserts but those aren’t a problem at all.

Depending on the thickness of the book, you will use one of two types of fillers for this method to work.  You are going to use either comic book backer boards, or bright white copy paper.  Thick books with over 60 pages should use copy paper.  Thinner books that are less than 40 pages should use comic book backer boards.

2018 Marvel Comics VENOM #1 Todd McFarlane 1:1000 Incentive Remastered B&W Variant

2018 Marvel Comics VENOM #1 Todd McFarlane 1:1000 Incentive Remastered B&W Variant

Let’s begin with a thinner glossy magazine pages paperstock modern age book.  This is the same book I featured in my blog post entitled, “Dry Cleaning Modern Age Comic Books with a Pencil Eraser“.    The book in question is $500 raw 9.4 copy of 2018 Marvel Comics VENOM #1 Todd McFarlane 1:1000 Incentive Remastered B&W Variant, as seen in this photo:

 

First thing you want to do is clean the book with a common pencil eraser or Absorene Eraser Pad and dust it off with a can of compressed air or a lotion-free tissue.  This is a black spine book, so we must take extra care of the spine and not cause any additional (one spine tick!  Can you believe it?!) spine damage to the book.  There is also a minor spine split at the bottom as well.  You must take absolute care as to not cause the existing spine split to split even more.  That is why we are doing a very light press on this book in this article, just to take out the cover bumps from production.

we are doing a very light press on this book in this article, just to take out the cover bumps from production

We are doing a very light press on this book in this article, just to take out the cover bumps from production and to avoid any damage to spine or cause a bigger spine split at bottom.

Since this is a thinner book, I am choosing to use the comic book backer board method to prevent a digital code imprint transfer during the pressing process phase.  You can use any size of backer board, such as modern age, silver age, or even magazine size.  In the following example I have chosen to use modern age size backer boards for in between the pages.  This book unfortunately already has a tiny spine split at the bottom, as seen in this photo:

Tiny 1/16" spine split at bottom of a spine on a 1:1000 inventive variant valued at $500.

Tiny 1/16″ spine split at bottom of a spine on a 1:1000 incentive variant valued at $500.

Find the centerfold of your book.

Set the black spine down on a sheet of Silicone Release Paper.  Find the centerfold of your book.

Take great care of the spine of your book and set the book down on a sheet of Silicone Release Paper. Find the centerfold of your book.  Place a backer board at the centerfold.  Do not snuggle the magazine size comic book backer board underneath the staples or on top of the staples.  Just up against the staples.

Place a backer board at the centerfold, against the staples. Not above or below the staples. Against the staples.

Place a backer board at the centerfold, against the staples. Not above or below the staples. Against the staples.

Next you will carefully close the book. Flip the book over, back cover side up. Find your digital code page.

Next you will carefully close the book. Flip the book over, back cover side up. Find your digital code page.

Next you will carefully close the book. Flip the book over, back cover side up. Find your digital code page.

Place a magazine size comic book backer board at the page where your digital code sticker page is resided.

Next you will carefully close the book. Flip the book over, back cover side up. Find your digital code page.

Next you will carefully close the book. Flip the book over, back cover side up. Find your digital code page.

Flip to the back cover. Place a magazine size comic book backer board at the last page between where your back cover and last page reside.

Place a backer board at the last page and back cover.

Place a backer board at the last page and back cover.

Be sure to place a third and final magazine size comic book backer board (or copy paper if it’s a thicker book) between the digital code sticker page and the page before it. This makes a total of three backer boards inside this book.

Be sure to place a final and third comic book backer board between the digital code sticker page and the page before it. This makes a total of three backer boards inside this book.

Be sure to place a final and third comic book backer board between the digital code sticker page and the page before it. This makes a total of three backer boards inside this book.

Be sure prior to pressing the book you back off the pressure adjustment screw on your press and lighten the pressure for the book’s thickness. You are pressing lightly so you do not need to worry about a vertical line traveling along the spine from the inconsistent size of the magazine size comic book backer boards against the inside spine of book.

You are pressing lightly so you do not need to worry about a vertical line traveling along the spine from the inconsistent size of the backer boards against the inside spine of book.

You are pressing lightly so you do not need to worry about a vertical line traveling along the spine from the inconsistent size of the backer boards against the inside spine of book.

Place 2 magazine size comic book backer boards on your press mat. Set 1 sheet of Silicone Release Paper on those 2 magazine size comic book backer boards.

Place 2 magazine size backer boards on your press mat. Set 1 sheet of Silicone Release Paper on those 2 magazine size backer boards.

Place 2 magazine size backer boards on your press mat. Set 1 sheet of Silicone Release Paper on those 2 magazine size backer boards.

Set the book down on the press carefully with SRP Paper and Magazine sized comic book backer boards.

Set the book down on the press carefully with SRP Paper and Magazine sized comic book backer boards.

Set the book down carefully and apply light pressure with your fingers to bump the cardstock up against the staples and spine. Place another sheet of Silicone Release Paper down on the book. Set a final pair of two magazine size comic book backer boards down on press.

Set the book down carefully and apply light pressure with your fingers to bump the cardstock up against the staples and spine. Place another sheet of Silicone Release Paper down on the book. Set a final pair of two magazine sized comic book backer boards down on press.

Set the book down carefully and apply light pressure with your fingers to bump the cardstock up against the staples and spine. Place another sheet of Silicone Release Paper down on the book. Set a final pair of two magazine sized comic book backer boards down on press.

Turn the press on and set your temperature to 150 degrees. Set your time to 500 seconds. Turn the pressure adjustment screw down to compensate for the thicker book and to prevent spine split.

Turn the press on and set your temperature to 150 degrees. Set your time to 500 seconds. Turn the pressure adjustment screw down to compensate for the thicker book and to prevent spine split.

Turn the press on and set your temperature to 150 degrees. Set your time to 500 seconds. Turn the pressure adjustment screw down to compensate for the thicker book and to prevent spine split.

After 500 seconds is up, you will flip the book over front side up and repeat the pressing for another 500 seconds. When the 500 seconds is up, turn off the press machine and leave the book inside machine for 24 hours.

After 24 hours, the book has been carefully removed from press to admire our handiwork.

After 24 hours, the book has been carefully removed from press to admire our handiwork.

We then flip through the book and examine the back cover to make sure the digital code has not imprinted onto the back cover or subsequent pages.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

We flip through the book to examine each page to make sure the digital code sticker has not imprinted itself onto any pages or back cover of book.

There will be trial and error through experience and doing more of these books over time, trust me. If you still see bumps, try applying slightly more pressure and try again. Always better to do light pressure and not enough, than to overdo it and ruin a valuable book!

Press on

The Secret to Obtaining Expensive “Low Print Run” Comic Book Variants for CHEAP

KRS COMICS EXCLUSIVE: LIMITED TO 1000 COPIES CON EXCLUSIVE: ONLY 150 AVAIL ONLINE ON KRSCOMICS.COM

2018 Marvel Comics VENOM #1 reboot Mike Mayhew Variant KRS COMICS EXCLUSIVE: LIMITED TO 1000 COPIES
CON EXCLUSIVE: ONLY 150 AVAIL ONLINE ON KRSCOMICS.COM

The Secret to Obtaining Low Print Run Expensive Comic Book Variants for CHEAP

by KaptainMyke

This discussion popped up on the CBCS discussion forums today.  Many have asked how to obtain the newest Mattina Metal Virgin Variants and not pay the ridiculous $300 price tag on ebay.

Welcome to the new form of ticketmaster and stubhub!  Instead of concert tickets it’s comic books.  The real secret is to have “liked” their facebook page, and sign up for accounts with:

www.asseenonadultswim.com
The Aspen Store
braintrustcomics.com
The Nerd Store
kevineastmanstudios
Golden Apple Comics

Scorpion Comics
thecomicmint
ComicsExposure
www.7ate9comics.com
Sad Lemon Comics (UK)
Frankie’s Comics

unknowncomics.com
krscomics.com
Jetpack Comics
Midtown Comics
jscottcampbell.com
Marc Ellerby, (UK) (Rick and Morty)
and Tony Moore  websites, etc and so on.

This is just a fraction of what’s out there.  Google your favorite artist or comic book store online.  Sign up for an account and be sure to subscribe to their newsletters or emails.  When you get an email that a pre-sale is happening, hypothetically say, Saturday at 9am EST time zone, you should set your calendar 10 MINUTES EARLY and log into your account.  Go to the page you want to buy the book from, and be sure to sort at the top of results “New to old” and be one of those people hitting refresh every 2 seconds buying that store exclusive 3 pack featuring a B&W Variant, Trade Dress Variant, and Virgin Variant all for just a mere $75 while everyone else is stuck paying $300 for the Virgin variant art and $100 for the trade dress version.

With today’s modern variant trend continuing, it’s also smarter to go ahead and buy the CGC 9.8 prescreened and guaranteed graded slabbed pre-orders.  Any variant over $50 is worth the extra $25 to get a 9.8 guarantee.